We choose tiles that are paved on the walls and floors for the walls and bathrooms in our homes. Why do we choose to tile in these locations? In fact, to a large extent depends on the tile having a waterproof function. T&A will analyze this issue with the following questions as an example.
Table of Contents
Are tiles not afraid of water?
On whether the tiles are not afraid of water, the personal view given depends on the use of the tiles. The accurate statement should be that the front of the tiles is not scared of water. Still, the back of the tiles can not be said to be not afraid of water. Why would an individual give such an opinion? This point is due to tiles characteristics, using environment, and paste of requirements. The following answers are provided to you one by one.
1. Why are tiles not afraid of water from the characteristics of tiles?
To understand the characteristics of tiles, we should know the specific production process of tiles. In fact, in simple terms, tile is the use of clay, firing after cutting, grinding, polishing, glazing, and different processing procedures. We need a variety of tiles. Therefore, tiles are not afraid of water in terms of their characteristics. There are two reasons for this.
(1) From the raw material of tile production, tile is clay for firing and production of a porcelain class, or ceramic and other, so this material is not afraid of water. That is to say, the tiles in the water soaking can be total immersion down, will not be due to the water immersion and tile corrosion, deterioration.
(2) from the tile production and processing process, is also not afraid of water. Tile production is through a series of physical changes, namely firing, cutting, grinding, glazing, etc., to manufacture into the tile. So in all of these processes, the product manufactured is not worried about water.
Summary of the problem: So, for some environments where water is present, we do not have to worry about the use of tiles. Even if the tiles are buried deep in the soil or submerged in water, tiles can use them.
2: from the use of tile environment, why is tile not afraid of water?
The most commonly used parts of the home decoration are the kitchen and bathroom. There are also many living and dining rooms that are also tiling. The kitchen bathroom floor is often water, so it can be seen that tiles are suitable for use in an environment where there is water. The specific reasons for this are due to the surface characteristics of the tiles.
(1) the tile surface is basically after the corresponding treatment, to achieve the water absorption rate of the tile surface is close to zero. Whether the surface of the tile is after the glaze treatment or other treatment methods, can basically achieve the consistency of the water absorption rate is infinitely close to zero. Therefore, water on the ground will not penetrate through the tiles to the following.
(2) due to the special treatment of the surface of the tiles, it is beneficial for us to clean the surface of oil and water, etc. For example, in the bathroom, there is a layer of water on the floor which, if it does not run off, will always be present on the surface of the tiles. So we use a mop, and it is clean. This also means that the tiles are not afraid of water.
Choice advice: for kitchens and bathrooms in the home, you should actually pay attention to the surface treatment of the tiles when choosing tiles. Although the surface of the tiles is basically not afraid of water, the surface of the tiles made of different manufacturing processes exists in additional stain resistance. This is also a basis for our choice of kitchen and bathroom tiles.
3: Why are tiles not afraid of water regarding tiling requirements?
Many tiles need to be soaked in water before being pasted, and after bathing, cement mortar is used to paste them. Of course, for low water absorption of tiles, do not need to use soaking water, but to use tile adhesive to paste. But again, it also shows that tiles are not afraid of water.
(1) high water absorption of tiles in the paste before, if we use cement mortar paste, most of them need to soak water. The purpose of drinking water is to make the pores on the back of the tiles filled with moisture and in a damp state. Then the combination of the pores and the cement mortar can be achieved, and the tiles can be pasted.
(2) low water absorption of the tiles when the paste, generally do not need to use soaking water. Because they are particularly few pores on the back, almost all are not. They typically choose a unique tile adhesive paste in the pasting. However, the back of the tiles should also be cleaned before pasting, and there should be no dust or oil.
Summary analysis: From the tile pasting method and the use of materials, many of the tiles in the paste before also need to use water for processing. This also shows that the tiles are not afraid of water.
Are tiles not afraid of water, and is it permissible to keep water in the lower part of the tiles?
Although tiles are not afraid of water, they should not be in a situation where there is always water after the tiles have been applied. This problem is most often found in our bathrooms. The presence of water in the tile paste layer can lead to the following two situations.
(1) The seams of the tiles quickly become moldy and black, and there is a risk of an unpleasant smell returning to our interior along the tile seams. This is due to the long-term presence of water under the tiles, mold, and deterioration.
(2) tiles may appear to change. The so-called situation change is due to the back of the water seeping in, resulting in the entire tile interior containing water. After a long time, the color of the tiles will have changed, and many spots will have appeared. The result is a severe color difference in the entire floor tile, which looks very ugly. One of the most common cases is the return of alkali around the perimeter.
Tile is a widespread material, and it is really not afraid of water. Hence, it is suitable for many wet and watery environments. However, just because a tile is not scared of water does not mean that it can have water in its bonding layer all the time after it is pasted. This is a point that we need to pay attention to the problem. That’s why I always recommend that you should be sure to close the gaps after tiling. You also can check our wall tile and floor tile catalog now.
